This is a demo store. No orders will be fulfilled.


PhidgetAdvancedServo 8-Motor, RCC0004_0


Control up to 8 RC servo motors or actuators with this controller board.

Connects to your computer via USB.


The PhidgetAdvancedServo 8-Motor allows you to control the position, velocity, and acceleration of up to 8 RC servo motors. It requires a 8-30VDC external power supply; its switching power supply allows the RCC0004 to efficiently operate from 8 to 30 VDC and can be used with a wide range of batteries. You can control the regulator and choose a global servo voltage of 5.0V, 6.0V, or 7.4V. A servo will have more torque when running at a higher voltage, but will have a shorter overall lifespan. Check your servo's data sheet and balance the voltage for your specific application. 

The RCC0004 connects directly to a computer’s USB port.

Comes Packaged with


  • Hardware mounting kit:
  • 4x M3 Bolts (2cm Length)
  • 4x Plastic spacers (5mm Length)
  • 4x M3 Nuts

Servo Controller

API Object Name


Number of Motor Ports


Pulse Width Min

83.3 ns

Pulse Width Max

2.7 ms

Pulse Width Resolution

83.3 ns

Pulse Code Period Max

25 ms


Controlled By

USB (Mini-USB)

API Object Name


Electrical Properties

Supply Voltage Min

8 V DC

Supply Voltage Max

30 V DC

Current Consumption Max

26 mA

Continuous Motor Current Max

(per motor) 1.6 A

Surge Current Max

(per motor) 3 A

Output Impedance (Motor)

600 Ω

Output Motor Voltage

5 V DC

USB Speed

Full Speed

Physical Properties

Power Jack Hole Diameter

5.5 mm

Power Jack Pin Diameter

2.1 mm

Power Jack Polarity

Center Positive

Recommended Wire Size

12 - 24 AWG

Object Temperature Min

0 °C

Object Temperature Max

70 °C

Note:: Current from USB supply is not available for motors.