3530_1 Phidget Optical Rotary Encoder
This encoder can measure rotation at speeds of up to 3000 RPM and plugs into a Phidgets Encoder Interface.
This is a small ball bearing construction, rotary encoder without index that goes up to 3000 rpm.
Connection
This encoder connects to a quadrature encoder interface. The connector at the end of the cable is compatible with all Phidgets encoder interfaces. To attach the shaft of this encoder to a motor or some other device, you can use a shaft coupler. See the Connection & Compatibility tab for details on interfaces and couplings.
Comes Packaged With
- Two mounting screws
|
Encoder Properties |
|
|
Output Circuit Type |
Push-Pull (Single-Ended) |
|
Controlled By |
Encoder Interface |
|
Encoder Resolution |
360 CPR |
|
Encoder Speed Max |
3000 RPM |
|
Electrical Properties |
|
|
Supply Voltage Min |
5 V DC |
|
Supply Voltage Max |
5 V DC |
|
Output Frequency Max |
80 kHz |
|
Physical Properties |
|
|
Shaft Diameter |
4 mm |
|
Cable Length |
1 m |
|
Shaft Maximum Axial Load |
10 N |
|
Shaft Maximum Radial Load |
20 N |
|
Operating Humidity Min |
30 %RH |
|
Operating Humidity Max |
(Non-condensing) 85 %RH |
|
Operating Temperature Min |
-25 °C |
|
Operating Temperature Max |
85 °C |
|
IP Rating |
IP54 |
|
Weight |
83 g |
