This is a demo store. No orders will be fulfilled.

DCM4107_0

DCM4107_0 57DMWH75 NEMA23 Brushless Motor with 4.25:1

£116.52

This 4-pole BLDC gear motor can output 12.2kg-cm of torque at speeds of up to 930 RPM. The shaft has a 4mm keyway for better coupling.

Or

The DCM4107 is a 24 volt brushless DC motor, generating 12 Kg-cm of torque at 930 RPM. The shaft is equipped with a 4mm key to improve coupling.

Brushless DC motors provide convenient position and velocity control through the use of their built in hall-effect sensor. They run quieter and last longer than their brushed counterparts. The 4.25:1 planetary gearbox on this motor results in higher torque at the cost of speed.

Connection
This motor must be controlled by a brushless DC motor controller that has the capability to both send control signals to the three motor wires, and also read the hall-effect feedback from the other five wires.

This diagram shows how to connect the motor wires to the controller.

Note: Because of the way this motor is built, you'll need to set negative P, I and D values when using the MotorPositionController object.

Note: Make sure to unplug the power cord from the motor controller before switching wires around.

Motor Properties

Motor Type

Brushless DC Motor

Number of Poles

4

Manufacturer Part Number

56JXE300K(4.3)/57DMWH75-2440

Output Power (Mechanical)

115 W

Rated Torque

12.2 kg·cm

Rated Speed

930 RPM

Electrical Properties

Rated Current

7 A

Rated Voltage

24 V DC

Coil Resistance

370 mΩ

Physical Properties

Shaft Diameter

12 mm

Mounting Plate Size

23

Operating Temperature Min

-20 °C

Operating Temperature Max

40 °C

Gearbox Properties

Gearbox Type

Planetary Gearbox

Gear Ratio

4 1/4 : 1

 

Documents