DC Solid State Relay - 30V 100A
This SSR switches up to 30VDC/100amp and connects to a PhidgetInterfaceKit 0/16/16 or OUT1100.
The 3952 DC Solid State Relay can be used to switch loads of up to 100A at 30VDC using the digital output from a OUT1100 - 4x Digital Output Phidget. The Relay comes with an optional protective cover to protect people from touching the exposed high power wires, and a diode to protect your SSR from harmful transients. All wires connect to this relay by screw terminals. If you are switching a high power load or find the relay is getting hot, please consider a heat sink. Heat sinks 3955 and 3956 are designed for use with this relay.
|
Electrical Properties |
|
|
Relay Output Type |
MOSFET |
|
Isolation Method |
Photoelectric |
|
Dielectric Strength |
2.5 kV AC |
|
Control Voltage Min |
4 V DC |
|
Control Voltage Max |
32 V DC |
|
Load Voltage Max (DC) |
30 V DC |
|
Load Current Min |
20 mA |
|
Load Current Max (DC) |
100 A |
|
Load Surge Current |
240 A |
|
Turn-on Time Max |
1 ms |
|
Turn-off Time Max |
0.5 ms |
|
Physical Properties |
|
|
Length |
58 mm |
|
Width |
45 mm |
|
Height |
25 mm |
|
Operating Temperature Min |
-30 °C |
|
Operating Temperature Max |
80 °C |
