4x Thermocouple Phidget
Connect up to four K, J, E or T type thermocouples to this Phidget to measure the temperature of the air or an object.
With this Phidget, you can connect up to four thermocouples to a single VINT port, making it ideal for temperature testing and comparison. You can use a J, K, E or T type thermocouple; set the appropriate type in software and it will convert sensor data into degrees Celsius automatically. If you have other thermocouple types, you can open the channel in VoltageInput mode and convert to temperature manually according to your thermocouple's datasheet.
One of the major advantages of using a thermocouple is the capability of using long wires. Thermocouples have been known to work with segments as long as 100m, while USB and other sensors suffer from voltage drops after 5 or 10m.
Please note that the longer you make your thermocouple wires, the more likely it is that you'll experience noise and interference. For more information, see our document on Addressing Electromagnetic Interference.
Board |
|
Controlled By |
VINT |
Number of Thermocouple Inputs |
4 |
Thermocouple Input |
|
Thermocouple Error Max (K-Type) |
± 2 °C |
Thermocouple Temperature Resolution (K-Type) |
0.04 °C |
Sampling Interval Min |
100 ms/sample |
Sampling Interval Max |
60 s/sample |
Thermocouple Voltage Resolution |
1 μV DC |
Onboard Temperature Sensor |
|
Temperature Error Max |
± 1 °C |
Sampling Interval Max |
60 s/sample |
Sampling Interval Min |
500 ms/sample |
Temperature Error Typical (At 25°C) |
± 0.25 °C |
Temperature Resolution |
0.063 °C |
Temperature Max |
85 °C |
Temperature Min |
-40 °C |
Electrical Properties |
|
Current Consumption Min |
10 μA |
Current Consumption Max |
5 mA |
Physical Properties |
|
Recommended Wire Size |
16 - 26 AWG |
Operating Temperature Min |
-40 °C |
Operating Temperature Max |
85 °C |