VCP1100_0
30A Current Sensor Phidget
£30.60
Measure in-line DC current flow of up to 30A with this Phidget that connects to a VINT port.
With the VCP1100, you can quickly and easily measure the current flow in an electronic circuit or device. Just put this current sensor in series with one of the power lines, and you'll be able to measure up to 30A of direct current. It connects to a port on a VINT Hub
Sensor Properties |
|
Sensor Type | Current (DC In-Line Hall Effect) |
Controlled By | VINT |
Input Current Min | -30 A |
Input Current Max | 30 A |
Current Measurement Resolution | 1.1 mA |
Surge Current (Input) | 100 A |
Measurement Error Max | 4 % |
Input Current Noise | 20 mA |
Sampling Interval Min | 20 ms/sample |
Sampling Interval Max | 60 s/sample |
Physical Properties |
|
Recommended Wire Size | 10 - 26 AWG |
Operating Temperature Min | -40 °C |
Operating Temperature Max | 85 °C |
Electical Properties |
|
Current Consumption Max | 1.8 mA |
Current Consumption Min | 20 μA |
Isolation Voltage (DC) | 50 V DC |
Electrical Properties |
|
Input Impedance | 1.2 mΩ |