Isolated 12-bit Voltage Output Phidget
Produce a voltage from -10 to +10 volts with this isolated voltage output module.
When you need to generate a voltage between -10 and +10 volts, this board will do the job. With a resolution of 4.9mV (12-bit) and current as high as 5mA, it is designed to interface with devices that are controlled by an analog voltage signal.
To use it, simply plug it into a VINT port and control the voltage with your program
Selectable Voltage Range
Need higher resolution? The output on this Phidget also has a 0 to 5V terminal that can be used instead of the ±10 terminal, yielding a resolution of 1.2mV. Both terminals are controlled as the same object in software; they cannot be controlled separately.
Isolated for Stability
This board is electrically isolated from input to output, protecting your system fom instability caused by unintentional ground loops.
|
Board Properties |
|
|
Controlled By |
VINT |
|
Electrical Properties |
|
|
Current Consumption Min |
35 mA |
|
Current Consumption Max |
85 mA |
|
Voltage Outputs |
|
|
Number of Voltage Outputs |
1 |
|
Current Sourcing |
varies* |
|
Current Sinking |
varies* |
|
Voltage Outputs (±10V Mode) |
|
|
Voltage Output Max |
± 10 V DC |
|
Output Voltage Resolution |
(12-bit) 4.9 mV DC |
|
Voltage Output Noise |
± 500 μV DC |
|
Voltage Outputs (5V Mode) |
|
|
Voltage Output Max |
5 V DC |
|
Output Voltage Resolution |
(12-bit) 1.2 mV DC |
|
Voltage Output Noise |
± 20 μV DC |
|
Physical Properties |
|
|
Recommended Wire Size |
16 - 26 AWG |
|
Operating Temperature Min |
-40 °C |
|
Operating Temperature Max |
85 °C |
* Current sourcing and sinking capability varies based on selected output voltage.
Documents
Library & Driver Downloads
