This is a demo store. No orders will be fulfilled.

1046_0B

1046_0B Phidget Bridge 4-Input

£110.16 £91.80

This board is needed to measure the output from a load cell. You can connect up to four load cells or strain gauges.

Or

The PhidgetBridge lets you connect up to 4 un-amplified Wheatstone bridges, such as:

  • Strain gauges
  • Compression load cells
  • Pressure sensors/Barometers
  • Piezoresistive accelerometers
  • Magnetoresistive sensors (Compasses)

The data rate and gain values can be configured in software.

USB Voltage 4.5 – 5.25VDC
USB Current 500mA
USB Quiescent Current 35mA
Total Current available to Bridge Outputs 465mA
Recommended wire size 16 – 26AWG
Differential Voltage resolution per channel 24 bits
Data Rates (affects all channels) 8ms to 1000ms in 8ms increments
Gain Settings (affects all channels) 1, 8, 16, 32, 64, 128
Input Current (Max) ±3nA
Operational Input Voltage Range GND + 0.25V to 5V Supply – 0.25V
Operating Temperature 0 - 70°C